Do it yourself
Frequently asked questions about cars and motorcycles

Fuse positioning on a Peugeot 307 to solve a fan issue

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Blower motor

Video tutorial

If the fan in your Peugeot 307 is not working at any of the four speeds, nor is the air recirculation or air conditioning functioning, you may have a burnt-out fan. The fan is located behind the dashboard, so you need to remove the steering column cover, shift the entire pedal assembly, and then you can access the fan, which requires a torque wrench to remove.

This is a very important job. Before doing this, check the fuses, both in the cabin fuse box located near the driver's side dashboard at the bottom left, and in the engine compartment where there is another fuse box under the cover.

The fuse for the fan has a relatively high amperage. However, be cautious.

If all the fuses are functioning correctly, the wiring could still be the issue. One thing that not everyone knows is that there are hidden fuses in the Peugeot 307. These are master fuses hidden under the ECU. With the vehicle off, you need to remove the connectors to access these fuses, which should be tested for optimal performance.


Updated on 3 July 2026 by ScegliAuto


Related tutorials

Peugeot 307 (2001-2009 / MK 1) The fuse boxes of the Peugeot 307 are responsible for containing the fuses that regulate the operation of the devices installed inside the vehicle: t…
Peugeot 307 (2001-2009 / MK 1) In today's tutorial video, find out where to locate the internal fuse box and the diagram for the Peugeot 307, following the instructions below. Firs…
Peugeot 307 (2001-2009 / MK 1) In this guide, you will find the main instructions useful for removing and replacing the cabin fan on the Peugeot 307. First, get inside the vehicle …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos