Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Connect Your Phone (Android or iOS) to a Peugeot 207

Model: Peugeot 207 MK 1 - Years 2006-2015

To connect your Android or iOS phone to your Peugeot 207, allowing you to talk safely while driving, start by turning the ignition key to position 1. Ensure your phone's Bluetooth is switched on. Now, search for the active Bluetooth connection for your Peugeot 207 and connect using a standard password, which could be "0000" or "1234". At this point, the car will prompt you to accept the phone connection. Press "OK" on the central selection button, and the vehicle will indicate what type of phone it is trying to connect, displaying a small phone symbol at the top. Once connected, you will see the Wi-Fi symbol next to the phone symbol. This applies to Android phones. For older iOS models, the procedure is the same as for Android.

Updated on 7 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD2 port located on the Peugeot 207?
Where is the OBD2 port located on the Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) To find the OBD2 port inside your Peugeot 207, all you have to do is carefully read and follow the steps described below. First, open the driver's si…
Where to Find the OBD Port of the Peugeot 207
Where to Find the OBD Port of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To locate the OBD port of your Peugeot 207, it only takes a few seconds. With the following guide, you will find it by following some simple steps. F…
How do you program the key of the Peugeot 207?
How do you program the key of the Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) In order to program the key of the Peugeot 207, you need to insert the blank key into the corresponding slot: once this has been done, you can connec…

    Frequently Asked Questions

    • 207 2006-2015 - Where is the Peugeot 207 oil pressure sensor located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos