Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD2 port located on the Peugeot Partner?

Model: Peugeot Partner Tepee MK 1 - Years 1996-2013

If you don't know where the OBD2 port is located on your first-generation Peugeot Partner, don't worry, as this guide will help you find it easily. First, get inside the vehicle and sit in the driver's seat. Next, locate the compartment in the lower left area of the dashboard, beneath the buttons. Now, remove the cover with your hands and find the OBD2 port, which is marked by a green colour. Additionally, below this port, you will also find all the various fuses for the vehicle.

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the Battery Located in the Peugeot Partner?
Where is the Battery Located in the Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) In this video, we can see where the battery is located in the Peugeot Partner and how to proceed if we need to replace it, a very simple operation. A…
How to Reset the AdBlue Warning Light on a Peugeot Partner?
How to Reset the AdBlue Warning Light on a Peugeot Partner?
Peugeot Partner Tepee (2018-2026 / MK 3) To reset the AdBlue warning light on a Peugeot Partner, you must first top up the tank so that the additive tank is full: once filled, ensure there a…
Where is the OBD port located in the Peugeot Partner van?
Where is the OBD port located in the Peugeot Partner van?
Peugeot Partner Tepee (2008-2018 / B9) In this video we can see where the OBD port is located in the Peugeot Partner van, useful in case we need to check the errors recorded in the control…

Other guides you may be interested in

    Frequently Asked Questions

    • Partner Tepee 2008-2018 - Where is the horn relay located on the Peugeot Partner? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos