Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Refill Urea on Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Checks and maintenance

See other generations:
Video tutorial

In this video tutorial, you can see how to refill urea on a Peugeot 308. The first step is to purchase a 10-litre bottle of urea that meets ISO 22241 standards. Wear a pair of protective gloves.

The urea refill tank is located at the rear of the car, so open the boot, remove the rear panel, and access the spare wheel (the cap is on the right side of the spare wheel; remove any tools to work more easily; at this point, you will see the black cover of the urea cap. Remove the black cover, unscrew the blue urea cap, insert the funnel into the tank, and refill with approximately 8 litres of urea.

Clean the urea cap and screw it back onto the tank.


Updated on 20 July 2026 by ScegliAuto


Related tutorials

How to Top Up the Brake Fluid in a Peugeot 308 Urea
How to Top Up the Brake Fluid in a Peugeot 308 Urea
Peugeot 308 (2013-2021 / T9, MK 2) In this video, you will learn how to top up the brake fluid in a Peugeot 308 Urea. First, lift the car on a ramp or on two axle stands for comfortabl…
How to top up AdBlue on a Peugeot 308
How to top up AdBlue on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) In this brief tutorial, we will see how to top up the AdBlue fluid on a Peugeot 308 with a BlueHDI diesel engine, second generation model produced fr…
How to Reset the Urea Light on a Peugeot 308?
How to Reset the Urea Light on a Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) When the Urea light illuminates on the Peugeot 308 dashboard, it indicates that the level of AdBlue additive in the tank is insufficient. To turn off…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos