Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Boot Light Bulb on a Peugeot 3008 and 5008 with a LED

Model: Peugeot 3008 P84, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Light bulb

See other generations:
Video tutorial

In this video, learn how to replace the boot light bulb on a Peugeot 3008 or 5008 with a LED. Using a small flathead screwdriver, pry off the boot light cover. Disconnect the electrical connector by pressing with your fingers, then remove the plastic cover to access the bulb; simply leverage the back with your screwdriver to remove the bulb from its housing.

There was already a LED bulb, but the YouTuber wanted to install a higher wattage one for more light. It is a T105W. Simply insert it, replace the cover, reconnect the electrical connector, and reposition the light cover.


Updated on 24 July 2026 by ScegliAuto


Related tutorials

How to Change the Number Plate Lights to LED on Peugeot 3008/5008 (and Citroen)
How to Change the Number Plate Lights to LED on Peugeot 3008/5008 (and Citroen)
Peugeot 3008 (2009-2016 / MK 1, T84) On the Peugeot 3008/5008, the number plate lights are housed in the tailgate. To replace the bulbs with LEDs, open the tailgate and locate the two li…
How to disassemble the rear headlight of the Peugeot 3008 and 5008
How to disassemble the rear headlight of the Peugeot 3008 and 5008
Peugeot 3008 (2009-2016 / MK 1, T84) The right rear light of the Peugeot 3008 can be removed from its housing following the same procedure used for removing the rear light of the Peugeot…
Replacing LED Bulbs on a Peugeot 3008
Replacing LED Bulbs on a Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) The video shows how to replace the LED bulbs in the rear light on a Peugeot 3008. This is a simple operation that can be done yourself and does not t…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos