Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : Replacing the led bulbs on a Peugeot 3008

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 MK 1, T84 - Years 2009-2016
Part: Headlight bulb
Operation: Replacing the led bulbs on a Peugeot 3008

The video shows how to replace the rear light led bulbs on a Peugeot 3008. It is a simple operation that can be done by yourself and that does not take long, at most a few minutes. Remove the cover inside the car with the help of a screwdriver. Then disconnect the connector by pressing on the two side tabs. With a 10 mm wrench, remove the nut. Then, press the blade to move the entire rear light assembly outwards. Remove the headlight. Unscrew the lamp holder counterclockwise and remove it. Replace the old light bulb with a led one. Carry out the assembly of the headlight.


Posted on 25 July 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos