Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : How do you replace the battery on the Peugeot 3008?

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 MK 1, T84 - Years 2009-2016
Part: Battery
Operation: How do you replace the battery on the Peugeot 3008?

The battery replacement on the Peugeot 3008 is done by opening the hood to access the engine compartment, locating the battery that is immediately under the windshield. Once it has been located, all the cables and plastic cover above the device must be disconnected. When these components have been removed, it will be possible to access the battery, which must also be released from the appropriate fixing bolts so that it can be removed from its seat. After it has been removed, the new replacement part can be properly installed.


Posted on 8 May 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 3008 2009-2016 - Where is the battery of the Peugeot 3008? Read Answer
    • 3008 2016-2023 - Why is the Peugeot 3008 Start & Stop system not working properly? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos