Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Timing Belt on a Peugeot 3008

Model: Peugeot 3008 MK 2, P84 - Years 2016-2023
Part: Timing belt

Replacing the timing belt on a vehicle is a complex task that should be performed by qualified personnel. Below are general instructions for the replacement. First, remove the panel located just below the windscreen, disconnect the battery, and remove the engine cover. Unscrew the bolts securing the engine mount on the right side. Next, remove the front right wheel and then take out the inner wheel arch. Remove the upper timing belt cover and loosen the tensioner for the auxiliary belt. Then, unscrew the crankshaft pulley and secure the relative position of the camshaft and crankshaft with a pin to maintain timing. After that, unscrew the bolts securing the lower cover, which will give you access to the drive belt that can be removed by loosening the tensioner.

Updated on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 3008 (2016-2023 / MK 2, P84) Today we will discover the information and steps useful for disassembling and replacing the timing belt of the Peugeot 3008 1.2 Puretech. In this cas…
Peugeot 3008 (2016-2023 / MK 2, P84) Today, discover the instructions that will allow you to remove and replace the timing belt on the Peugeot 3008. First, raise the vehicle and remove t…
Peugeot 3008 (2009-2016 / T84, MK 1) Do you want more information about timing belt replacement? Here it is. First, we will tell you when this maintenance should be done. On the Peugeot …

Other guides you may be interested in

    Frequently Asked Questions

    • 3008 2016-2023 - When to replace the timing belt on the Peugeot 3008 SUV ?? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos