Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Cabin Filter on Peugeot 3008

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part: Cabin air filter

The cabin air filter is located just behind the centre tunnel console and can be accessed fairly easily from the passenger side. It is advisable to remove the sound-absorbing cover located just below the glove compartment, secured with three push clips and two plastic nuts. At this point, open the glove compartment and remove the plastic cap on the left corner to access the air duct housing. Remove the protective cap and extract the filters. Then, reverse the process to install the new ones.

Updated on 19 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter on a Peugeot 3008
How to Replace the Cabin Air Filter on a Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) Replacing the cabin air filter or pollen filter on a Peugeot 3008 is a very simple task that can be done in a few steps. The cabin air filter is loca…
How to Replace the Cabin Air Filter in a Peugeot 3008
How to Replace the Cabin Air Filter in a Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) How to replace the cabin air filter in a Peugeot 3008? Start by removing the cover located on the right side of the glove compartment (unscrew the se…
How to Replace the Cabin Filter on a Peugeot 3008
How to Replace the Cabin Filter on a Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) How do you replace the cabin filter on a Peugeot 3008? Open the door and enter the cabin. Use a plastic lever to detach the trim located at the side …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos