Do it yourself
| ||||
|
Peugeot 208 - Video tutorial
Model: Peugeot 208
UP, UJ, UB, MK 2, UW
- Years 2019-2024 Let's see how to install an LED that indicates that the DPF is undergoing regeneration: the YouTuber builds it himself, but there's nothing stopping you from buying it already made; for 7.99 euros on Amazon, you can get 20 (+3.99 euros for shipping), not everyone is so passionate about electronics. Now we need to access the support where we will house the LED, near the front deflector. With a thin drill bit, we will make a small hole in the plastic and install the LED. Now let's move on to the connections. We need to connect to the two black wires of the mirror defrost, solder them, and then insulate the solder joints with professional electronic tape. We can put the support back in place. Now the LED will light up when the DPF regenerates.
Posted on 28 July 2023 by ScegliAuto
Fog lights and LED position installation on Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) If you want to give your car a more modern and captivating look, installing LED lights is certainly an excellent solution; now xenon is outdated and
How to reset the "Service" warning light on a Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Before we can start, we will have to go and sit on the driver's seat of our Peugeot 208. Let's start by pressing and holding the "SET" button at the
Resetting the tire pressure warning light on the Peugeot 208.
Peugeot 208 (2012-2019 / MK 1, A9) Today's procedure will show us how to reset the tire pressure warning light on the Peugeot 208, as well as the 2008. Before performing the reset, it |
Frequently Asked QuestionsHow do you open the fuel flap of the Volkswagen Golf 5?In order to open the fuel flap of the Volkswagen Golf 5, you need to press the appropriate button inside the passenger compartment, which is located in the rear part of the glove box on the driver's door. By pressing the button, the flap will unlock and it will then be possible to open it manually. Once the flap has been opened, the fuel tank access cap must be unscrewed. To close everything again, it will be sufficient to screw the tank cap again; subsequently, the flap must also be closed, pressing it so that it fits thanks to its locking mechanism. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.021
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |