Do it yourself
Frequently asked questions about cars and motorcycles

How to Program the Key of the Peugeot 107?

Model: Peugeot 107 MK 1 - Years 2005-2014
Part: Key

To program the key of the Peugeot 107, insert the blank key into the ignition barrel and turn it to position two while the driver's door is open. Now close the door three times, leaving it open again; then turn the key in the ignition barrel again and repeat the door procedure. This will correctly program the key, allowing you to use the central locking and start or stop the car. At the end of the procedure, you can remove the key from the barrel.

Updated on 10 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 107 (2005-2014 / MK 1) Today, we will explain how to program the key/remote for the Peugeot 107. To reprogram the key, get into the vehicle and insert the key into the igni…
Peugeot 107 (2005-2014 / MK 1) This guide will show you the procedure to program the key remote for the Peugeot 107, as well as for the Citroen C1 and Toyota Aygo. First, get insid…
Peugeot 107 (2005-2014 / MK 1) If the smart key for your Peugeot 107 (2005-2014) has suddenly stopped working without any damage, it is likely that the internal battery has run out…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos