Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter

Model: Peugeot 3008 MK 1, T84 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter is located on the passenger side, just behind the glove compartment. Open the glove compartment door, unclip the rod that supports its opening and closing, and press the sides to retract the end stops, allowing the door to fully swing down.

At this point, you can access the air duct housing, remove the cover of the cabin air filter housing, and take out the old filter. Check for any dirt residue and insert the new filter (activated carbon filters are recommended), orienting it according to the direction of the airflow.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter in the Peugeot 3008
Replacing the Cabin Air Filter in the Peugeot 3008
Peugeot 3008 (2016-2023 / P84, MK 2) As usual, position the car (in this case, the Peugeot 3008) on a stable and secure surface, either on level ground or on a ramp. The cabin air filter…
Replacing the Cabin Air Filter in a Peugeot 3008
Replacing the Cabin Air Filter in a Peugeot 3008
Peugeot 3008 (2016-2023 / P84, MK 2) In this video tutorial, you will learn how to remove and replace the cabin air filter in a Peugeot 3008. The cabin filter is located on the passenger…
Replacement of the Cabin Pollen Filter
Replacement of the Cabin Pollen Filter
Peugeot 3008 (2009-2016 / MK 1, T84) Locate the position of the cabin pollen filter housing, which is situated behind the glove compartment on the passenger side. Remove the base of the …

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos