Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : Replacing the cabin pollen air filter.

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 MK 1, T84 - Years 2009-2016
Part: Air filter
Operation: Replacing the cabin pollen air filter.

Identify the position of the passenger compartment air pollen filter housing which, in this case, is located behind the glovebox on the passenger side. Disassemble the base of the glovebox by removing the two clips on the sides indicated by the upward arrows and releasing the three central clips, for the interlocking, indicated by the downward arrows in the images. It is not necessary to disassemble the light bulb. Open the glove compartment and unscrew the three screws that lock the cover. We remove the plastic cover of the filter housing and take it out. We insert the new filter in the same position and reassemble everything. The filter must be replaced every 15,000 km or at least every year. The maintenance operation seen in the images is performed on a Peugeot 3008.


Posted on 9 September 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 3008 2016-2023 - Where is the cabin filter located, in the Peugeot 3008? Read Answer
    • 3008 2009-2016 - Where is the Peugeot 3008 air filter located? Read Answer
    • 3008 2016-2023 - Where is the pollen filter on my paugeot 3008? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos