Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : Peugeot 3008 cabin air filter replacement

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 P84, MK 2 - Years 2016-2023
Part: Cabin air filter
Operation: Peugeot 3008 cabin air filter replacement

In this video tutorial we will see how to remove and replace the cabin air filter in a Peugeot 3008. The cabin filter is located on the passenger side: then we enter the car and start removing the clips that we find under the glovebox. in order to release the plastic bulkhead that we find next to it with the help of a lever. Then we access the cover of our filter: then unscrew the torx screw and open the glovebox by removing the other torx T20 screws; after which we remove the filter cover and pull it off, replacing it with the new one!


Posted on 24 December 2023 by ScegliAuto

    Frequently Asked Questions

    • 3008 2016-2023 - Where is the Peugeot 3008 cabin air filter located? Read Answer
    • 3008 2016-2023 - Where is the cabin filter of a Peugeot 3008 located? Read Answer
    • 3008 2009-2016 - Where is the Peugeot 3008 antipoline filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos