Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Update the Front Badge of the Peugeot 208-e

Model: Peugeot 208 UB, UJ, UP, MK 2, UW - Years 2019-2026
Part: Manufacturer emblem

In this video, you can see how to update the badge of the electric Peugeot 208, which has the custom '208-e' badge only on the rear, while the front displays the standard Peugeot 208 symbol. To personalise it further, the YouTuber decided to order a rear badge from the local dealership and place it on the front of the vehicle. In reality, the writing is slightly smaller, so you need to be particularly careful when removing the original badge. Mark the position of the original badge with masking tape, then carefully remove it using dental floss to avoid damaging the bodywork. Clean the bodywork until it is smooth and shiny, and then position the new badge.

Updated on 31 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper from a Peugeot 208?
How to Remove the Front Bumper from a Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) To replace the front bumper on a Peugeot 208, you need to loosen the screws that secure the bumper to its housing: these screws are located inside th…
How to disassemble the front door panel in the Peugeot 208?
How to disassemble the front door panel in the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) In this tutorial we can see how to disassemble the front door panel in the Peugeot 208, an extremely simple and fast operation. First of all, we open…
How to Dismantle and Change the Key Battery of the Peugeot 208
How to Dismantle and Change the Key Battery of the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) To dismantle the key of the Peugeot 208 and change the battery, first, remove the small cover with the Peugeot emblem using a small flathead screwdri…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos