Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Peugeot Expert: Reset the Service Light, Change the Cabin Filter and Locate the OBD Port

Model: Peugeot Expert Mark3, MK 3 - Years 2016-2025
Part: Service warning light

In this video, you will learn how to perform some tasks on the Peugeot Expert: the first is to reset the service light. Simply press and hold the control button until it turns off. However, ensure that you have completed the required services as per the maintenance schedule first. Now, let's locate the OBD port, which is always near the steering wheel (here it is on the right, but on left-hand drive versions, it is on the opposite side, so on the left of the steering wheel, under the dashboard). The cabin filter will be found in the same location on left-hand drive models, but it will be on the passenger side, making it easier to access. You will easily find the cover at the footwell, which we can only glimpse here. It will be easy to remove and clean the housing with a blast of compressed air to remove dust and debris, and replace the dirty filter with a new one.

Updated on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on Peugeot Expert 3
How to Reset the Service Light on Peugeot Expert 3
Peugeot Expert (2016-2025 / Mark3, MK 3) If you own a third series Peugeot Expert and the service light continues to appear on the instrument panel even after performing the vehicle service,…
How to reset the service indicator on the Peugeot Expert?
How to reset the service indicator on the Peugeot Expert?
Peugeot Expert (2016-2025 / Mark3, MK 3) In a few simple steps, we will see how to reset the maintenance service light for the oil change in the Peugeot Expert. First, get into the vehicle a…
How to Reset the Service Light on the Peugeot Expert
How to Reset the Service Light on the Peugeot Expert
Peugeot Expert (2016-2025 / Mark3, MK 3) To reset the Service light on the Peugeot Expert, press and hold the right and left buttons located in the centre of the instrument panel. While hold…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos