Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the External Wing Mirror Cover on the Peugeot 206

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Side mirror

Video tutorial

This guide shows you how to remove and replace the external cover of the wing mirror on the Peugeot 206. First, move to the outside of the vehicle and start prising off the side of the wing mirror cover using a plastic lever to avoid damaging it and the mirror; then, if necessary, remove the mirror or just replace the cover, as shown in the video.

Now check that the retaining clips of the cover are in good condition, install it, and secure it properly, following the video tutorial to the end!


Updated on 8 September 2026 by ScegliAuto


Related tutorials

Guide to Replacing the External Wing Mirror on a Peugeot 206
Guide to Replacing the External Wing Mirror on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In this brief guide, you will discover the main instructions on how to remove and replace the external wing mirror on a Peugeot 206. First, open the …
Replacing the External Wing Mirror on the Peugeot 206
Replacing the External Wing Mirror on the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Today, follow these main instructions to remove and replace the external wing mirror on the Peugeot 206. First, open the front door of the vehicle an…
Replacing Car Wing Mirror
Replacing Car Wing Mirror
Peugeot 206 (1998-2012 / MK 1) Replacing the external wing mirror of your car is a task that can be easily done yourself, knowing which model of mirror needs to be replaced. The re…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos