Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Pollen Filter on the Peugeot 3008

Model: Peugeot 3008 MK 1, T84 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter on this car model is located behind the central console and consists of two panels. This design allows for replacement through a relatively small access space.

Inside the glove compartment, there is a sort of cap that, when removed, allows access to the filter housing without needing to disassemble the entire drawer. Start by removing the cover applied just under the glove compartment, then take out that internal cap and proceed with replacing the filters (activated carbon filters are recommended).


Updated on 22 February 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Pollen Filter on a Peugeot 3008
How to Replace the Cabin Pollen Filter on a Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) How do you replace the cabin pollen filter on a Peugeot 3008? Open the glove compartment, get a screwdriver or a cordless drill: remove the plastic c…
How to Replace the Cabin Pollen Filter in the Peugeot 3008
How to Replace the Cabin Pollen Filter in the Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) The housing for the cabin pollen filter in the Peugeot 3008 can be found at the back of the glove compartment, on the passenger side inside the cabin…
How to Replace the Cabin Air Filter on a Peugeot 3008
How to Replace the Cabin Air Filter on a Peugeot 3008
Peugeot 3008 (2009-2016 / MK 1, T84) Replacing the cabin air filter or pollen filter on a Peugeot 3008 is a very simple task that can be done in a few steps. The cabin air filter is loca…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos