|
Do it yourself
| |||
| ||||
How to Replace the Cabin Pollen Filter in the Peugeot 3008
Model: Peugeot 3008
T84, MK 1
- Years 2009-2016
The housing for the cabin pollen filter in the Peugeot 3008 can be found at the back of the glove compartment, on the passenger side inside the cabin. To remove it, first take off the horizontal part located under the glove compartment. For this operation, remove the two clips (located at the spots indicated by the red arrows in the images) and the three clips (also indicated by the three red arrows in the images) that hold it in place. It is not necessary to disconnect the light from the electrical supply. Open the glove compartment and unscrew three screws: two on the left side wall inside and one on the cover of the filter housing. Remove the cover and extract the filter. Replace it with the new one and reassemble everything by reversing the operations. The pollen filter should be replaced every 15,000 miles or at least once a year.
Updated on 7 March 2026 by ScegliAuto
Video tutorial
Related tutorials
Peugeot 3008
(2009-2016 /
T84, MK 1)
How do you replace the cabin pollen filter on a Peugeot 3008? Open the glove compartment, get a screwdriver or a cordless drill: remove the plastic c…
Peugeot 3008
(2009-2016 /
T84, MK 1)
Replacing the cabin air filter or pollen filter on a Peugeot 3008 is a very simple task that can be done in a few steps. The cabin air filter is loca…
Peugeot 3008
(2016-2023 /
MK 2, P84)
Today we will see the step-by-step instructions that will allow us to dismantle and replace the air filter of the cabin of the Peugeot 3008. First of…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.095
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |