Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 307
    4. : Battery replacement for the Peugeot 307

Peugeot 307 - Video tutorial

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Battery
Operation: Battery replacement for the Peugeot 307

If the battery of the Peugeot 307 has left us stranded and does not respond to recharge attempts, the solution is to replace it. We open the hood of the engine compartment, find the battery on the driver's side, disconnect the positive terminal clamp, remove the plastic cover, and disconnect the negative terminal clamp. Using a socket wrench with an extension, we unscrew the bolt that secures the bracket to the base of the battery. We remove the old battery and replace it with the new one, positioning the bracket at the base and screwing the bolt, using a piece of paper if necessary to facilitate positioning. We apply some grease to the terminals, connect the negative terminal clamp, replace the plastic cover, and connect the positive terminal clamp.


Posted on 16 March 2024 by ScegliAuto

    Frequently Asked Questions

    • 307 2001-2009 - Why does the Peugeot 307 not start after replacing the battery? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos