Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight on the Peugeot 308

Model: Peugeot 308 T9, MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Headlight

See other generations:
Video tutorial

Here are the instructions to remove and replace the front headlight on the Peugeot 308. First, open the bonnet and start unscrewing all the fixing screws located on the top and bottom of the front headlight; gently detach it from the bodywork and disconnect the electrical connector for the bulbs located at the rear, as shown in the video.

At this point, if necessary, replace only the bulbs or the entire headlight unit, installing it correctly and making the connection, following the video tutorial to the end!


Updated on 29 September 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Peugeot 308
How to Replace the Front Headlamp Bulb on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) Replacing the left front headlamp bulb on a Peugeot 308 is a simple and quick task that you can do yourself, aided by our video tutorial. To replace …
How to Replace the Headlamp Bulb on a Peugeot 308
How to Replace the Headlamp Bulb on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) To correctly replace the bulb inside the front headlamp of your Peugeot 308 second series, follow this guide and implement the described steps. First…
Replacing Front Headlamp Bulb on Peugeot 308
Replacing Front Headlamp Bulb on Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Have damaged bulbs on your Peugeot 308? Here's how to remove them from inside the headlamp. Open the front bonnet by pulling the lever located at the…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos