Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the Cdi unit in the Peugeot Kisbee?

Model: Peugeot Peugeot Various
Part: Control unit

The control unit of the Peugeot Krisbee moped, in case it needs to be replaced, requires a simple job to be done and this video is the demonstration of it, in fact not only shows the various steps, but also describes them. After lifting the seat, proceed to unscrew the fuel tank cap, then remove the perimeter pins of the plastic under-seat compartment and at this point locate the Cdi module mentioned, located in the top left corner, looking at the scooter frontally. All that remains is to extract it from its seat and disconnect the power cable plugs.

Posted on 16 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the BSI unit of Peugeot cars?
How do you reset the BSI unit of Peugeot cars?
Peugeot Peugeot Various In order to reset the BSI unit of Peugeot cars, you need to open the hood so that you can connect a computer to the port located directly on the unit…
How do you reset the BSI unit of Peugeot cars?
How do you reset the BSI unit of Peugeot cars?
Peugeot Peugeot Various The BSI control unit installed on board Peugeot vehicles can be reset by connecting a diagnostic tool to the OBD port located on the dashboard just b…
How to reset the BSI unit in a Peugeot?
How to reset the BSI unit in a Peugeot?
Peugeot Peugeot Various In this tutorial we can see how to reset the BSI unit in a Peugeot, an extremely simple and quick operation to be carried out, for example, as an att…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos