Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on a Peugeot 108?

Model: Peugeot 108 MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Tail light

Video tutorial

To remove the rear light on a Peugeot 108, open the tailgate to access the screws securing the side trim near the light: by detaching this trim, you will find the screws underneath that secure the light unit in its housing. This will allow you to extract the light and disconnect the connectors inside: doing so will enable you to connect the new light unit to the connector.

You can then insert the new light and secure it with the appropriate screws.


Updated on 30 September 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on Peugeot 108
How to Replace the Front Headlight Bulb on Peugeot 108
Peugeot 108 (2014-2021 / MK 1) To replace the front headlight bulb on your Peugeot 108 yourself, pay attention to the following guide and apply the described procedure. First, ensu…
How to Replace the Rear Headlamp Bulb on a Peugeot 108
How to Replace the Rear Headlamp Bulb on a Peugeot 108
Peugeot 108 (2014-2021 / MK 1) To replace the rear headlamp bulb on your Peugeot 108, follow the steps outlined in this mini guide. First, switch off the car and open the boot. Nex…
How to Replace the Front Headlight Bulb on the Peugeot 108
How to Replace the Front Headlight Bulb on the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) When the left front headlight bulb on the Peugeot 108 needs replacing due to a malfunction, follow these steps: - Open the bonnet; - Remove the bumpe…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos