Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front bumper on the Peugeot 107

Model: Peugeot 107 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Front bumper

Video tutorial

To replace the front bumper on the Peugeot 107, start by raising the car at both front sides, open the bonnet, and go to the left front wheel arch. Remove the clip that holds the bumper (joint between the bumper and wing) and unclip it; repeat the same operation on the other side.

Now, unscrew the 4/5 bolts under the bumper using a 10mm socket; then unscrew the 3 bolts above the bumper and remove the upper clip. Finally, pull the bumper off to remove it; for reassembly, perform the same operation in reverse.


Updated on 5 October 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of a Peugeot 107
How to Remove the Front Bumper of a Peugeot 107
Peugeot 107 (2005-2014 / MK 1) Do you want to replace the front bumper of a Peugeot 107? Let’s see how to proceed. Lift the bonnet and secure it. Use a socket wrench to unscrew the…
How to Remove the Front Bumper of the Peugeot 107?
How to Remove the Front Bumper of the Peugeot 107?
Peugeot 107 (2005-2014 / MK 1) To remove the front bumper of the Peugeot 107, first open the bonnet to access the screws that secure the bumper from the top. Once the top screws ar…
…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos