Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Shock Absorbers on a Peugeot Partner B9

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Shocks

See other generations:
Video tutorial

To change the rear shock absorbers on a Peugeot Partner, lift the vehicle with a ramp, remove the rear wheel. Using a 14mm hex key and a 24mm spanner, loosen the bolt that secures the shock absorber to the chassis without removing it. With a 24mm spanner and a power tool with a 24mm socket, remove the bolt that secures the shock absorber to the arm. Place a jack under the arm, remove the bolts, and take out the old shock absorber.

Insert the new shock absorber, secure it with its bolts, and refit the wheel. Repeat the same operations on the other side and lower the vehicle.


Updated on 11 October 2026 by ScegliAuto


Related tutorials

How to Change the Number Plate Bulb in the Peugeot Partner?
How to Change the Number Plate Bulb in the Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) The number plate bulb holders in the Peugeot Partner are located at the bottom of the rear tailgate. Replacing these bulbs requires the tailgate to b…
Where are the fuses located on a Peugeot Partner?
Where are the fuses located on a Peugeot Partner?
Peugeot Partner Tepee (2008-2018 / B9) In the Peugeot Partner, the fuses are divided among the designated fuse boxes installed in the vehicle. In this model, there are three fuse boxes. Th…
How to Replace the Timing Belt on a Peugeot Partner 1.6 HDI
How to Replace the Timing Belt on a Peugeot Partner 1.6 HDI
Peugeot Partner Tepee (2008-2018 / B9) In this tutorial, learn how to replace the timing belt on a Peugeot Partner 1.6. Before starting, open the front bonnet of your Peugeot Partner. Begi…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos