Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the BSI unit of the Peugeot 307?

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Warning light – error code

In order to reset the BSI control unit on the Peugeot 307, you need to connect a diagnostic tool to the OBD port of the vehicle, located on the dashboard just below the steering column. Once the scanner is connected, you can select the model of the car and its corresponding version. Then, you can follow all the instructions in the tutorial to ensure that the BSI control unit reset is completed. After the reset is done, you can disconnect the scanner and verify that everything is working properly.

Posted on 14 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to restore the BSI module of the Peugeot 307
How to restore the BSI module of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this short and simple guide, we will see how to reset the BSI module of the Peugeot 307, but also on most models of the manufacturer. The BSI modu…
How to Program the BSI of the Peugeot 307
How to Program the BSI of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Follow the instructions below to reconfigure the BSI of the Peugeot 307, as well as most models from the Peugeot - Citroen group. First, remove the B…
How do you reset the BSI unit of the Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) The reset operation of the BSI control unit installed on the Peugeot 307 involves connecting a diagnostic tool to the OBD port of the vehicle, which …

Other guides you may be interested in

    Frequently Asked Questions

    • 307 2001-2009 - If the fuel warning light on my Peugeot 307 no longer works, where do I find the fuse box? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos