Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the engine oil of your Vespa 125, start by making sure the engine is cold. Then, place the Vespa on a flat and stable surface. Remove the oil cap located on the right side of the crankcase and place a container under the oil drain plug. Remove the drain plug and let the used oil drain completely. Check and replace any damaged gaskets. Tighten the drain plug securely. Fill the gearbox with the recommended oil up to the correct level. Tighten the oil cap and start the engine to allow the oil to circulate. Turn off the engine and check the oil level using the dipstick, and we will have completed the replacement.

Posted on 3 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gear Oil of the Piaggio Vespa PX 125
How to Replace the Gear Oil of the Piaggio Vespa PX 125
Vespa Px 125 To replace the gear oil of the Piaggio Vespa PX 125, loosen the drain plug of the oil reservoir located at the bottom of the transmission casing on t…
Changing the Transmission Oil on the Piaggio Vespa Px 125 - Lml Star 125
Changing the Transmission Oil on the Piaggio Vespa Px 125 - Lml Star 125
Vespa Px 125 In this video tutorial, you will learn how to remove and replace the transmission oil on the Piaggio Vespa Px 125, as well as on the Lml Star 125. Fi…
How to Replace the Gear Oil of the Piaggio Vespa Px 125 - Lml Star 125
How to Replace the Gear Oil of the Piaggio Vespa Px 125 - Lml Star 125
Vespa Px 125 In this brief and simple guide, you will learn how to replace the transmission oil of the Piaggio Vespa Px 125, as well as the Lml Star 125 2-stroke.…

Replacing the Front Brake Pads on the Piaggio Vespa 50 LX

This guide will illustrate the instructions on how to remove and replace the front brake pads on the Piaggio Vespa 50 LX. First, place your scooter on the centre stand and start unscrewing the nuts securing the front wheel to remove it; then use pliers to remove the brake pad retaining clip, as shown in the video. At this point, remove the old pads, cleaning the caliper of dirt; press the caliper piston back to allow for the installation of the new pads (of excellent quality). Finally, reassemble the front wheel.

Watch the video!


by ScegliAuto

More videos