Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Following these short and simple steps, we will see how to disassemble and replace the horn and the front badge of the Piaggio Vespa PX 125. First of all, put the center stand and start by removing the logo or emblem of the manufacturer; then unscrew the screw of the front badge to remove it, disconnecting the electrical connector of the horn that we find on the back, as shown in the video. At this point, unscrew the screws of the horn to remove it from the front badge, replacing it with the new one; reassemble the horn on the front badge and finally the front badge on the shield, fixing it properly!

Posted on 6 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Suspension on a Piaggio Vespa PX 125 - Lml Star 125
How to Replace the Rear Suspension on a Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 This brief guide outlines the steps to remove and replace the rear suspension on a Piaggio Vespa PX 125, as well as on an Lml Star 125. First, place …
Replacing the Spark Plug of the Piaggio Vespa PX 125 - LML Star 125
Replacing the Spark Plug of the Piaggio Vespa PX 125 - LML Star 125
Vespa Px 125 Today, we will go through the instructions to remove and replace the spark plug of the Piaggio Vespa PX 125, as well as the LML Star 125. First, plac…
How to Remove the Engine from a Piaggio Vespa PX 125 - Lml Star 125
How to Remove the Engine from a Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 In this video tutorial, you will learn how to remove the engine from the bodywork of the Piaggio Vespa PX 125 and the LML Star 125. First, place the …

How to Replace the Coolant in the Piaggio Medley 125?

To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant.

Watch the video!


by ScegliAuto

More videos