Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Below we will discover the steps that illustrate the procedure for removing and replacing the rear light and its bulbs on the Piaggio Medley 125 scooter. First, place the scooter on the centre stand and start by opening the seat and unscrewing the screws in the under-seat compartment; remove the tail section and then unscrew the screws of the rear light, disconnecting the electrical connector for the lights to remove it. At this point, it will be possible to replace the stop and indicator bulbs, replacing the entire rear light if necessary; reassemble and connect the light, installing all other components.

Posted on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the Piaggio Medley 125?
How do you replace the exhaust pipe of the Piaggio Medley 125?
Medley 125 It will be possible to replace the exhaust of the Piaggio Medley 125 by loosening the screws that fix the exhaust terminal to its supports, at the re…
How to reset the service on the Piaggio Medley 125 scooter?
How to reset the service on the Piaggio Medley 125 scooter?
Medley 125 In this tutorial we can see how to reset the service on the Piaggio Medley 125 scooter, an extremely simple and fast operation, to be carried out onl…
How to Reset the Service Light on a Piaggio Medley 125 Scooter?
How to Reset the Service Light on a Piaggio Medley 125 Scooter?
Medley 125 In this tutorial, see how to reset the service light on a Piaggio Medley 125 scooter, an extremely simple and quick operation, to be done only after …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos