Do it yourself
Frequently asked questions about cars and motorcycles

Model: Piaggio Ape
Part: Light bulb

In this video, we will see how to replace the bulb in a Piaggio Ape: first, remove the frame with the side indicator; it is held by a screw located on the outer side, then simply pull it towards you. Disconnect the electrical connector of the indicator, and then unscrew the three screws that hold the headlamp in its housing. Pull it towards you and also disconnect the connector, this time for the headlamp. Remove the plastic cover and then unscrew the metal cover of the bulb holder. Replace the bulb and then reinsert it into the bulb holder: screw it back in, replace the cover and the connector, screw back the three fixing screws, and finally reconnect the indicator connector and clip the frame back in place with its screw.

Posted on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Ape To change the engine oil of a Piaggio Ape, start by lifting the vehicle with a jack and ensuring it is stable. This operation should be performed wit…
Ape Before changing the starter motor, ensure that the issue is not just a flat battery. Once this problem is ruled out, obtain the starter motor from Am…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos