Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Transmission Oil Change on Piaggio Liberty 50

Model: Piaggio Liberty 50
Part: Checks and maintenance

This video is currently unavailable

For the transmission, use the appropriate 80W-90 oil. Start the scooter for a few minutes to warm the oil in the system. Unscrew the screw that acts as a plug for the drain hole of the variator box, as shown in the video.

Use a tube to collect the used oil in a container, as the drain hole is in a rather awkward position. Once finished, refit the screw with a ratchet spanner and unscrew the upper filler cap by hand.

Measure the amount of oil drained and refill the same amount from the upper hole. Nothing easier! Good luck!


Updated on 2 April 2026 by ScegliAuto


Related tutorials

How to Change the Transmission Oil of the Piaggio Liberty 50
How to Change the Transmission Oil of the Piaggio Liberty 50
Liberty 50 Let’s briefly review the instructions on how to replace the transmission oil of the Piaggio Liberty 50S scooter, following these simple steps. First,…
How to Change the Gear Oil on a Piaggio Liberty 50 S?
How to Change the Gear Oil on a Piaggio Liberty 50 S?
Liberty 50 To change the gear oil on the Piaggio Liberty 50 S, loosen the drain plug located at the bottom of the transmission casing: once this plug is loosene…
How to Replace the Transmission on the Piaggio Liberty 50?
How to Replace the Transmission on the Piaggio Liberty 50?
Liberty 50 To replace the transmission on the Piaggio Liberty 50, you need to loosen the screws that secure the cover containing the transmission, located on th…

How to Replace the Exhaust on the Suzuki GSX-R 600

To replace the exhaust on the Suzuki GSX-R 600, loosen the screws that secure the exhaust end can to its housing, located near the rear wheel on the right side of the bike. At this point, you can proceed by widening the connecting ring between the exhaust and the collector. Next, completely detach the old exhaust to position the new one: connect it to the collector by reinserting the ring and securing it to the bike's side supports.

Watch the video!


by ScegliAuto

More videos