Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Piaggio
    3. :
  3. Ciao
    4. : Replacing the pulley and belt on the Piaggio Ciao - Yes - Bravo

Model: Piaggio Ciao
Part:
Replacing the pulley and belt on the Piaggio Ciao - Yes - Bravo

In today's video we will see how to disassemble and replace the pulley and drive belt on a Piaggio Ciao, but also on the Si, Bravo and various Garelli models. First of all we put the central stand and immediately start removing the clutch cover, unscrewing the fixing screws; now we are going to unscrew the fixing nut of the rear pulley, in order to remove it and unhook the transmission belt, as shown in the video. At this point we can proceed with the replacement of the components, correctly adjusting the belt; we just have to reassemble everything!


Posted on 16 February 2024 by ScegliAuto



How to disassemble the variator of the Piaggio Ciao - Bravo - Yes
Ciao .. assembly of the Piaggio Ciao, but also of the Bravo and the Si. First we put the central stand and start by removing the plastic cover of the variator..
Replacing the Piaggio belt Hello, Yes, Garelli
Ciao Let's see today in this short and simple guide the instructions that will allow us to disassemble and replace the transmission belt of the Piaggio Ci
How to disassemble the exhaust pipe of Piaggio Ciao - Bravo - Garelli.
Ciao .. exhaust pipe of the Piaggio Ciao, as well as the Bravo and Garelli. First of all, let's put the center stand and start unscrewing the fixing screws of..

Replace the brake and clutch levers on the Kawasaki ZX 6R

In today's video tutorial we will see how to remove and replace the brake and clutch levers on the Kawasaki Ninja ZX 6R, 636, but also on the ZX 10R. First of all we proceed with disassembling our front brake lever; to do this we unscrew the central pin, using a screwdriver and a Phillips wrench, as shown in the video. At this point we remove and replace the lever with the new one, of the right type; we then carry out the adjustment of the stroke of the lever. In the same way we then move on to replacing the clutch lever, disconnecting the cable and reassembling everything!

Watch the video!


by ScegliAuto

More videos