Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front brake cable on the Piaggio Vespa PX?

Model: Piaggio Vespa Px 150
Part: Checks and maintenance

Video tutorial

To replace the front brake cable on the Piaggio Vespa PX, loosen the screws located at the bottom of the front fairing to free the instrument cluster. By disconnecting the connectors, you can completely remove it and then pull the brake from the lever; this will need to be pulled by accessing from underneath the mudguard and also detached from the corresponding caliper.

At this point, the new cable can be inserted into the caliper and secured with the appropriate clip; it should then be routed behind the fork and inserted until it emerges from the back of the instrument cluster. Here, connect it to the lever and reinsert the instrument cluster.


Updated on 28 April 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Shoes on a Piaggio Vespa PX 125?
How to Replace the Rear Brake Shoes on a Piaggio Vespa PX 125?
Vespa Px 150 To replace the rear brake shoes on a Piaggio Vespa PX 150, loosen the screws securing the exhaust cover. Once removed, loosen the screws securing the…
How to Replace the Front Mudguard on the Piaggio Vespa PX 150 - LML Star 150
How to Replace the Front Mudguard on the Piaggio Vespa PX 150 - LML Star 150
Vespa Px 150 This guide explains how to remove and replace the front mudguard on the Piaggio Vespa PX 150, as well as on the LML Star 150. First, place the centra…
How to Replace the Front Suspension on a Piaggio Vespa PX 150 - LML Star 150
How to Replace the Front Suspension on a Piaggio Vespa PX 150 - LML Star 150
Vespa Px 150 In this short and simple guide, you will learn how to remove and replace the front suspension on a Piaggio Vespa PX 150, as well as on an LML Star 15…

How to Dismantle the Centre Fairing of the Piaggio MP3

Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos