Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Piaggio
    3. : Liberty 200

How to Install the Voltage Regulator on the Piaggio Liberty 200

Model: Piaggio Liberty 200
Part: Radiator

Video tutorial

In this brief and simple guide, you will see how to install the voltage regulator on the Piaggio Liberty 200 scooter, as well as on the 150 and 125 models. First, place the scooter on its stand and start by opening the seat; then remove the rear rack to create a new space for the voltage regulator, as shown in the video.

At this point, connect the regulator to the battery, securing it properly with the two screws; now connect the battery and reassemble the tail section and the top box, following the tutorial video until the end!


Updated on 10 May 2026 by ScegliAuto


Related tutorials

How to Replace the Voltage Regulator on a Piaggio Zip
How to Replace the Voltage Regulator on a Piaggio Zip
Zip Below are the steps to remove and replace the voltage regulator on the Piaggio Zip scooter. First, place the scooter on its stand and start by removi…
How to Replace the Voltage Regulator on the Piaggio Beverly 250 - 500
How to Replace the Voltage Regulator on the Piaggio Beverly 250 - 500
Beverly 250 This guide will show you the steps to remove and replace the voltage regulator on the Piaggio Beverly 250 scooter, as well as the 500; the regulator …
How to Install the Windscreen on a Piaggio Liberty?
How to Install the Windscreen on a Piaggio Liberty?
Liberty To install the windscreen on the Piaggio Liberty, insert the large bush, the ring, and then the pin onto the mounting bracket, finally adding the bol…

How to Dismantle the Engine of a Piaggio Zip?

To dismantle the engine block of the Piaggio Zip, first extract it from its housing: once removed, you can proceed by loosening the screws that secure the side casing and also removing the spark plug from the top of the cylinder. This way, you can unscrew the bolts that secure it to its seat and then loosen the bolts that attach the connecting rod to the piston. By removing the piston itself, you can also dismantle the connecting rod and subsequently remove all other components located inside the engine block.

Watch the video!


by ScegliAuto

More videos