Do it yourself
| ||||
|
Model: Piaggio Beverly 300
In this new mini guide we will explain how to replace the dipped beam headlight bulb of the Piaggio Beverly 300. First you need to unscrew the two screws on the front bezel and remove the latter. At this point, unscrew all the screws located in the front and rear area of the headlight so that it can be completely released. Disconnect the electrical connector and remove it completely. Reach the rear of the headlight, disconnect the bulb connector and replace the bulb with a new one that is perfectly compatible. Finally, reconnect the electrical pin and mount the headlight correctly.
Posted on 27 April 2024 by ScegliAuto
|
How to change the gearbox oil of the Piaggio Vespa Px 125 - Lml Star 125Today we will see, in this short and simple guide, how to replace the transmission oil of the Piaggio Vespa Px 125, but also of the Lml Star 125 2-stroke. First of all we put the central stand and we start to unscrew the oil vent bolt of the transmission, which we find on the right side casing; to do this we use a 10 mm socket wrench, letting the oil drain in a container for about ten minutes. At this point we unscrew the filler screw, in order to let the oil flow more quickly; then we finally top up, following the video to the end! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |