Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this very simple video guide, you will learn how to remove and replace the front headlight bulb on a Piaggio Beverly 300 IE. First, remove the screws at the bottom of the instrument panel with a screwdriver: then also remove the upper screws of the headlight and take off the plastic cover, as shown in the video. At this point, remove the additional screws underneath and take off the wing mirrors to remove the instrument panel. All that’s left is to take off the bulb protection cap and disconnect the electrical connector along with the metal clip to replace it!

Updated on 29 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlight Bulb of the Piaggio Beverly 300
Replacing the Front Headlight Bulb of the Piaggio Beverly 300
Beverly 300 Here are the instructions and procedure for removing and replacing the dipped beam bulb of the front headlight of the Piaggio Beverly 300 scooter. Fi…
Replacing the Front Headlight Bulb on a Piaggio Beverly 300-350
Replacing the Front Headlight Bulb on a Piaggio Beverly 300-350
Beverly 300 In this guide, you will find step-by-step instructions to remove and replace the front headlight bulb on a Piaggio Beverly 300 and 350 scooter. First…
Replacing the headlight bulb on a Piaggio Beverly 300
Replacing the headlight bulb on a Piaggio Beverly 300
Beverly 300 In this video, we will see how to remove and replace the headlight bulb on a Piaggio Beverly 300 or 350, following the instructions below. First, rem…

How to Replace the Air Filter on a Honda XL1000 Varadero?

In this tutorial, you will see how to replace the air filter on a Honda XL1000 Varadero, a very simple operation. First, remove the seat, then unscrew the two rear mounting bolts of the tank, the two front ones, and the remaining ones located on the sides. Once done, close the two fuel taps, disconnect the rubber hose, and lift the tank. At this point, you will have access to the filter box, which can be opened by removing the 8 screws around the perimeter. Once the filter is replaced, reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos