Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Vespa Px 125
Part:

This guide provides instructions for removing and replacing the rear brake pedal on a Piaggio Vespa PX 125. First, place the central stand and begin unscrewing the fixing nuts located under the footboard; then remove the pedal along with the brake cable, as shown in the video. At this point, disconnect the cable and remove the brake pedal; then install the new pedal or the cable connected to the wheel drum, securing it properly to the footboard with the original screws, following the video tutorial to the end for reassembly!

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the rear brake shoes of the Piaggio Vespa PX 125?
How do you replace the rear brake shoes of the Piaggio Vespa PX 125?
Vespa Px 125 In order to replace the rear brake shoes of the Piaggio Vespa PX 125, you need to loosen the screws that secure the rear wheel to the corresponding s…
How do you replace the rear brake shoes of the Piaggio Vespa PX 125?
How do you replace the rear brake shoes of the Piaggio Vespa PX 125?
Vespa Px 125 It will be possible to replace the rear brake shoes of the Piaggio Vespa PX 125 by loosening the screws that secure the exhaust cover and once this h…
Removing the Brake Cable on a Piaggio Vespa Px 125
Removing the Brake Cable on a Piaggio Vespa Px 125
Vespa Px 125 Start by unscrewing the 13 mm nut that secures the cable to the rear brake, as shown in the video. Once done, pull it firmly without hesitation, extr…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos