Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Engine Block from a Piaggio Vespa PX 125

Model: Piaggio Vespa Px 125
Part: Engine

Video tutorial

In this guide, you will find instructions to remove the entire engine block from the Piaggio Vespa PX 125. First, place the stand and begin by removing the two side boxes; then remove the spare wheel and the rear wheel, followed by the exhaust. At this point, disconnect all cables for the gearbox and clutch, also disconnect the rear brake cable; remove the carburettor and disconnect the rear suspension, then remove the central pin of the support to take out the entire engine block from the frame!


Posted on 27 March 2026 by ScegliAuto


Related tutorials

How to Replace the Throttle Cable on a Piaggio Vespa PX 125
How to Replace the Throttle Cable on a Piaggio Vespa PX 125
Vespa Px 125 This guide will illustrate the procedure for disassembling and replacing the throttle cable on the Piaggio Vespa PX 125. First, place the central sta…
How do you disassemble the engine of the Piaggio Vespa PX 125?
How do you disassemble the engine of the Piaggio Vespa PX 125?
Vespa Px 125 To disassemble the engine of the Piaggio Vespa PX 125, you will need to loosen the screws that secure the body panel covering the engine block in the…
How do you replace the rear headlight bulb of the Piaggio Vespa PX 125?
How do you replace the rear headlight bulb of the Piaggio Vespa PX 125?
Vespa Px 125 In order to replace the rear light of the Piaggio Vespa PX 125, you need to loosen the screws that secure the optical group to its housing: these scr…

How to Change the Engine Oil and Oil Filter on the Ducati Hypermotard

Discover the steps to perform routine maintenance by changing the engine oil and oil filter on the Ducati Hypermotard. First, place your motorcycle on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge located right next to it using the appropriate tool, as shown in the video. At this point, install the new filter and unscrew the filler cap, pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos