Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To disassemble the engine of the Piaggio Vespa PX 125, you will need to loosen the screws that secure the body panel covering the engine block in the central rear part of the vehicle: once these panels have been removed, it will be possible to loosen the engine supports screws and disconnect cables and manifolds. Then it will be possible to proceed by loosening the screws fixing the cylinder head and cylinder in order to remove them and access the piston contained inside: it will now be possible to detach the piston from the connecting rod, to access the crankshaft and all the components that will need to be replaced.

Posted on 24 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Wheel of the Piaggio Vespa PX 125 - LML Star 125
How to Replace the Rear Wheel of the Piaggio Vespa PX 125 - LML Star 125
Vespa Px 125 Follow these instructions to remove and replace the rear wheel of the Piaggio Vespa PX 125 and the LML Star 125. First, place the central stand and b…
How to Remove the Engine from a Piaggio Vespa PX 125 - Lml Star 125
How to Remove the Engine from a Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 In this video tutorial, you will learn how to remove the engine from the bodywork of the Piaggio Vespa PX 125 and the LML Star 125. First, place the …
How to Replace the Gear Oil of the Piaggio Vespa PX 125
How to Replace the Gear Oil of the Piaggio Vespa PX 125
Vespa Px 125 To replace the gear oil of the Piaggio Vespa PX 125, loosen the drain plug of the oil reservoir located at the bottom of the transmission casing on t…

How to Replace the Front Bulb on the Honda SH 125

This tutorial explains the steps to replace the front headlamp bulb on the Honda SH 125. This is a very simple procedure. First, remove the front shield of the scooter to access the bulb replacement. To perform this first step, unscrew the lower screw and the two upper screws that secure the cover. At this point, the bulb will be clearly visible. Simply unscrew the bulb and insert a new one. It is recommended to carry out this procedure after ensuring that the bulb to be removed has cooled down.

Watch the video!


by ScegliAuto

More videos