Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads of the Piaggio Liberty 125?

Model: Piaggio Liberty 125
Part: Brake pads

Video tutorial

To replace the front brake pads of the Piaggio Liberty 125, unscrew the bolts that secure the brake caliper to the disc: this will allow you to move the caliper and slide the pads out from inside. After the old pads are removed, insert the new ones into the caliper and position it back onto the disc.

Secure the piece by inserting the appropriate bolts that were previously removed; after installation, check that the front brake functions correctly.


Updated on 3 July 2026 by ScegliAuto


Related tutorials

How do you bleed the brakes on the Piaggio Liberty 125?
How do you bleed the brakes on the Piaggio Liberty 125?
Liberty 125 In order to bleed the brakes on the Piaggio Liberty 125, you will need to loosen the small drain plug located near the front and rear brake calipers.…
Replacing the Front Headlight Bulb on Piaggio Liberty 125
Replacing the Front Headlight Bulb on Piaggio Liberty 125
Liberty 125 In this video, we will see how to remove and replace the front headlight bulb on a Piaggio Liberty 125. First, we will remove the screws that hold th…
How to Replace the Rear Brake Shoes of the Piaggio Liberty 125
How to Replace the Rear Brake Shoes of the Piaggio Liberty 125
Liberty 125 In this tutorial, you will learn how to remove and replace the rear brake shoes of the Piaggio Liberty 125 scooter. First, place your scooter on the …

How to Change the Transmission Oil in the Honda SH 150i Scooter?

Changing the transmission oil in the Honda SH 150i scooter, as shown in this tutorial, is an extremely simple and quick operation. First, wait until the engine is cool enough, then locate the three bolts at the rear of the casing and position a container underneath them. Next, use a 12mm socket to remove the two inner bolts, allowing all the oil in the system to drain out, and then tighten the lower bolt. At this point, simply pour in the new oil through the upper hole, using a syringe and a thin tube if necessary.

Watch the video!


by ScegliAuto

More videos