Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Vespa 125 Lx
Part:

To install the stand on a Piaggio Vespa, insert the stand into the appropriate mounting plates. These should then be aligned with the designated slots, securing everything with the corresponding bolts and nuts. Once the spring that regulates the stand's operation is also inserted, you can open and close the stand to check its functionality. Ensure that it is securely fastened with the appropriate bolts to avoid any issues while riding.

Updated on 27 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Battery replacement for Piaggio Vespa 125 LX
Battery replacement for Piaggio Vespa 125 LX
Vespa 125 Lx In a few simple steps, we will see the process of disassembling and replacing the battery of the Piaggio Vespa 125 LX. First, we put the scooter on t…
How to perform a service on the Piaggio Vespa 50 - 125 LX
Vespa 125 Lx This guide explains how to carry out the routine maintenance service for the oil change on the Piaggio Vespa 50 and 125 LX in simple steps. First, po…
How to Remove the Rear Wheel of the Piaggio Vespa LX 125
How to Remove the Rear Wheel of the Piaggio Vespa LX 125
Vespa 125 Lx This guide shows the steps to remove and replace the rear wheel of the Piaggio Vespa LX 125 scooter, following the instructions below. First, place t…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos