Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The reset of the service reminder light on the 2023 Piaggio Beverly follows a simple and quick procedure that can be done independently. To proceed with the reset, we need to access the dashboard and press the TRIP A button, located below the display, to access the service light. While holding down the TRIP A button, turn off and on the dashboard. Release the button only when the light has turned off. The procedure following the reset of the light should only be done after performing the necessary maintenance operations such as oil and oil filter replacement, brake check, and general vehicle maintenance.

Posted on 29 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on a Piaggio Beverly 400 scooter?
How to reset the service light on a Piaggio Beverly 400 scooter?
Beverly 400 In this tutorial, see how to reset the service light on a Piaggio Beverly 400 scooter, a very simple and quick operation. Before proceeding, ensure t…
How to Replace the Fuel Filter on the Piaggio Beverly 400
How to Replace the Fuel Filter on the Piaggio Beverly 400
Beverly 400 Below are the instructions for disassembling and replacing the fuel filter on the Piaggio Beverly 400 scooter. First, place the scooter on the centre…
How to Install the Clutch Disc on a Piaggio Beverly 350 or 400
How to Install the Clutch Disc on a Piaggio Beverly 350 or 400
Beverly 400 In this video, you can see how to assemble the oil bath clutch disc of a Piaggio Beverly 350 or 400. It is a kind of puzzle that should only be attem…

How to Replace the Spark Plug in a Yamaha FZ 150

In this tutorial, you will see how to replace the spark plug in a Yamaha FZ 150, an extremely simple and quick operation. First, wait until the engine is sufficiently cool and ensure the key is not inserted. Then, move to the right side of the motorcycle and locate the spark plug. Disconnect the power connector, grasp the spark plug with a 16mm socket, and carefully unscrew it. At this point, insert the replacement, tighten it without applying excessive force, and reconnect the connector. Finally, start the engine to verify that the new spark plug functions correctly.

Watch the video!


by ScegliAuto

More videos