Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the soft top of the Porsche Boxster

Model: Porsche Boxster 986, MK 1 - Years 1996-2004
Part: Convertible top

The instructions in this guide will show us how to disassemble and eventually replace the convertible top of the Porsche Boxster, in simple and quick steps. First, we open the car doors and start disconnecting the fasteners of the convertible top attached to the lower part; then we unscrew the screws of the convertible top to release it and remove it, as shown in the video. At this point, we carry out the repair or replacement of the convertible top, fixing it correctly; all that's left is to check its proper functioning, replacing any necessary accessory components of the convertible top.

Posted on 25 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Porsche Boxster (1996-2004 / 986, MK 1) How do you remove the convertible top from an older model Porsche Boxster? Follow these steps: Use a screwdriver to remove the side plastic trim piec…
Porsche Boxster (1996-2004 / 986, MK 1) Before you begin, sit in the driver seat of your Porsche Boxster. Start by unscrewing and removing the screws that secure the airbag to the steering …
Porsche Boxster (1996-2004 / 986, MK 1) The driver seat fuse in your Porsche Boxster is located inside the fuse box. The fuse box is positioned below the steering column, near the hinge of …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos