Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Inner Panel of a Porsche 911

Model: Porsche 911 997 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Car door

See other generations:
Video tutorial

In this video, see how to remove the side panel of the door on a Porsche 911. Since the vehicle is equipped with side airbags, disconnect the negative terminal of the battery to prevent accidental deployment. First, remove the triangle located at the side of the front window, where a screw is hidden.

Next, take off the two pieces around the door handle that conceal additional screws; the innermost one is quite difficult. Another screw is hidden inside the internal door lock; this can be easily removed as it is snap-in. After removing the screw on the thickness of the trim, begin prying off the trim starting from the top. You will only need to disconnect the electrical connectors, and the job will be complete.


Updated on 11 October 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery of a Porsche 911
How to Replace the Key Battery of a Porsche 911
Porsche 911 (1997-2005 / 996) Start by inserting the tip of a small flathead screwdriver into the key of your Porsche 911 and prying it open. This will expose the dead battery. Pr…
Removing the Wiper Motor on Porsche 911
Removing the Wiper Motor on Porsche 911
Porsche 911 (1982-1991 / ) Removing the wiper motor from the Porsche 911? Start by removing the rear wiper motor. Use a socket wrench to remove the wiper arm from the rear wind…
Replacing the Door Panel on a Porsche 911 Carrera
Replacing the Door Panel on a Porsche 911 Carrera
Porsche 911 (2005-2011 / 997) Let's see how to remove the left front door panel of a Porsche 911 Carrera. Disconnect the battery terminals located in the engine compartment. Using…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos