Do it yourself
Frequently asked questions about cars and motorcycles

How to Open the Hood on a Porsche Boxster

Model: Porsche Boxster MK 2, 987 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Body

See other generations:
Video tutorial

In this video, see how to open the hood on a Porsche Boxster. Take the key fob and press the release button (located above the key), then slightly lift the hood and pull the release lever to the left.

Once the hood is released, lift it up and secure it (including the safety prop). Now that the hood is open, you can perform your maintenance.

To close the hood: let it drop down from a minimal height. Ensure it closes properly.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

Porsche Boxster (1996-2004 / MK 1, 986) Replacing the air filter on a Porsche Boxster? Let's see how to remove the air filter from inside the engine compartment. Lift the hood, disconnect t…
Porsche Boxster (1996-2004 / MK 1, 986) Is the strut that supports the hood worn out? Here’s how to remove the strut from the Porsche. Lift the hood and secure it. Use a screwdriver to deta…
Porsche Boxster (1996-2004 / MK 1, 986) How do you remove the convertible top from an older model Porsche Boxster? Follow these steps: Use a screwdriver to remove the side plastic trim piec…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos