Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the battery of the key fob remote for the RAM 2500.

Model: RAM 2500 DT, MK 5 - Years 2019-2026
Part: Key

Today we will discover the information that will allow us to disassemble and replace the battery of the key remote for the RAM 2500. First, we take our remote and begin to remove the physical key from inside it; then we pry on the sides to open the remote in two parts, thus removing the battery inside, as shown in the video. At this point, we install the new battery, of the correct type (in this case a CR 2032 3V); insert it in the correct direction and reassemble the two halves of the remote, applying the reverse process!

Posted on 4 February 2025 by ScegliAuto

Video tutorial

Related tutorials

RAM 2500 (2009-2019 / MK 4, D2, DS, DJ) If the key fob for your RAM 2500 (2013-2018) has suddenly stopped working and you want to learn how to properly replace the battery, follow these ste…
RAM 2500 (2019-2026 / DT, MK 5) Replacing the dead battery in the RAM 2500 remote is very simple. Let's see how to proceed in this tutorial. For this operation, you need a replaceme…
RAM 2500 (2009-2019 / MK 4, D2, DS, DJ) In this tutorial, you will see how to replace the battery in the remote for the RAM 2500 pickup, a very simple and quick operation. To do this, in ad…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos