Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to board the RAM 2500 when the remote control stops working

Model: RAM 2500 MK 4, D2, DS, DJ - Years 2009-2019
Part: Key

When the remote control of the RAM 2500 stops working, it means that it needs to be reprogrammed. This can happen when replacing the vehicle's battery or when the remote control's battery is low. To reprogram the key and access the vehicle, we must remove the emergency metal key from inside the remote control and then insert it into the lock. Once the key is inserted into the lock, we rotate the key to the right 10 times and to the left 10 times, then remove the key and press the opening and closing button on the remote control three times in a row.

Posted on 19 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Fob Battery in a RAM 2500
How to Replace the Key Fob Battery in a RAM 2500
RAM 2500 (2009-2019 / MK 4, D2, DS, DJ) If the key fob for your RAM 2500 (2013-2018) has suddenly stopped working and you want to learn how to properly replace the battery, follow these ste…
How to Replace the Remote Battery of the Ram 2500
How to Replace the Remote Battery of the Ram 2500
RAM 2500 (2019-2026 / DT, MK 5) In today's video, you will see how to replace the battery in the remote for the Ram 2500. This video also applies to other variants of the American p…
How to Replace the Remote Battery in a RAM 2500 Pickup?
How to Replace the Remote Battery in a RAM 2500 Pickup?
RAM 2500 (2009-2019 / MK 4, D2, DS, DJ) In this tutorial, you will see how to replace the battery in the remote for the RAM 2500 pickup, a very simple and quick operation. To do this, in ad…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos