Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. RAM
    3. :
  3. 3500
    4. : How to replace the side light bulb on the Dodge RAM 3500?

RAM 3500 - Video tutorial

Model: RAM 3500 MK 5, DT - Years 2019-2024
Part: Side turn signal light bulb
Operation: How to replace the side light bulb on the Dodge RAM 3500?

In order to replace the side light bulb of the Dodge RAM 3500 you have to go and detach the ceiling light containing the bulb using an object that acts as a lever, such as a screwdriver. Once the ceiling light has been removed, it will be possible to access the underlying light bulb, which must then be extracted and disconnected from its connector. Once the old bulb has been removed, a new one can be installed by plugging it into the connector and inserting it into the spotlight. Finally, it will be necessary to fit the latter inside its housing on the side of the car.


Posted on 7 April 2024 by ScegliAuto



How to replace Dodge RAM 3500 low beam and fog light bulbs
RAM 3500 (2009-2019 / DS, DJ, MK 4) To change the headlight lights of the Dodge RAM 3500 we start by raising the bonnet, remove the 3 screws that hold the headlight (2 to the side and 1
How to replace the headlight bulb on the Dodge Ram 3500?
RAM 3500 (2019-2024 / MK 5, DT) In order to replace the headlight bulb of the Dodge Ram 3500 you have to loosen the rivets that are located in the wheel arch corresponding to the bu
How to replace the headlights on the Dodge RAM 3500
RAM 3500 (1993-2002 / BR, MK 2, BE) Let's find out in this guide the steps that will allow us to remove and replace the front lights of the Dodge RAM 3500. First, let's move to the fron

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos