Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Outside Rearview Mirror of the RAM Promaster

Model: RAM Promaster MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Side mirror

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove and replace the outside rearview mirror of the RAM Promaster, following the instructions below. First, open the front door and start removing the door panel; to do this, unscrew all the mounting screws found on the sides, using levers to detach and remove it, as shown in the video.

Next, unscrew the mounting screws of the outside rearview mirror, disconnecting the electrical connector; then pull the mirror out from the outside and replace it with the new one!


Updated on 20 May 2026 by ScegliAuto


Related tutorials

How to Replace the Mirror Bulb on a Ram Promaster?
How to Replace the Mirror Bulb on a Ram Promaster?
RAM Promaster (2014-2022 / MK 1) To replace the bulb in the exterior rearview mirror of a Ram Promaster, pry under the mirror glass to detach it from its housing. After removing the …
How to Replace the Side Mirror on a Ram ProMaster
RAM Promaster (2014-2022 / MK 1) To replace the side mirror on your Ram ProMaster, remove the plastic cover on the door that surrounds the front glass. Under this cover, you will fin…
Diagram and location of the external fuses of the RAM Promaster - Fiat Ducato.
Diagram and location of the external fuses of the RAM Promaster - Fiat Ducato.
RAM Promaster (2014-2022 / MK 1) This brief guide will show us information about the positioning and layout of the external fuse box of the RAM Promaster, as well as the Fiat Ducato.…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos