Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the Ram Promaster stock car stereo

Model: RAM Promaster MK 1 - Years 2014-2022
Part: Car stereo

In this video tutorial we will see the steps on how to disassemble and replace the stock car radio of the Ram Promaster. First we get on board the car and begin to disassemble the standard car radio; to do this we use the special extractor tools to be inserted inside the holes, by pulling and extracting the radio, as shown in the video. At this point we disconnect the electrical connectors that we find on the back; then we go to install the new car radio, making the appropriate changes to the electrical wiring. We just have to follow the video to the end for the reassembly!

Posted on 23 May 2022 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the RAM Promaster?
Where are the fuses located in the RAM Promaster?
RAM Promaster (2014-2022 / MK 1) The fuse boxes of the RAM Promaster are responsible for containing all the fuses that regulate the operation of the devices on the vehicle: in this t…
How do you replace the fog light bulb on the RAM Promaster?
How do you replace the fog light bulb on the RAM Promaster?
RAM Promaster (2014-2022 / MK 1) It will be possible to replace the fog light bulb of the RAM Promaster by accessing the underside of the bumper, allowing you to locate the correspon…
How to Adjust the Sliding Door on the RAM ProMaster?
How to Adjust the Sliding Door on the RAM ProMaster?
RAM Promaster (2014-2022 / MK 1) To adjust the sliding door on the RAM ProMaster, open the door to access the screws located at the hinges. Once you locate these screws, tighten or l…

BMW E90 E91 E92 E93: Replace Front Window Regulator

Replacing the front window regulator for BMW E90, E91, E92, and E93 models follows a similar procedure for all these versions of the Anglo-German automaker's vehicles. First, obtain a flathead screwdriver to remove the inner door panel. You need to take off the cover of the armrest structure that is snap-fitted. After that, you can reconnect the wiring and screw everything back in place. Finally, reinstall the panel and insert the window glass into the structure. Having someone assist you will make the process easier.

Watch the video!


by ScegliAuto

More videos